RE: Battery care in storage -
encantotom - 10-20-2013
if you look at the specs for the schematic i posted you can look the ones i did up and it will tell you. dont know if yours is the same, but easily found out from the part numbers.
tom
RE: Battery care in storage -
Flick - 10-21-2013
Ok I talked with Newell service today and they recommended that I put a battery tender on the house and chassis batteries. One for each set. He said since they are tied together (both chassis together as well as well as both house) that one tender on one of the chassis batteries and one on one of the house should do it. He said just to tell whoever I get the tender from what size batteries I have and how many so I get the correct size tender.
A few of you have recommended sites to buy these at and I have seen some locally here at a hardware shop as well. Not sure my hardware guys will know what size I need though so can any of you comment on this set up as to whether this sounds correct and can you tell me what size tenders I should buy?
RE: Battery care in storage -
rheavn - 10-21-2013
Todd,
You should refer to the manufacturer recommendation. No matter which brand you go with they should have a web site and/or a tech line that will clarify your exact needs.