New design for LED tail light - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Exterior (https://newellgurus.com/forumdisplay.php?fid=7)
+--- Thread: New design for LED tail light (/showthread.php?tid=5602)

---

RE: New design for LED tail light - TJ Clark - 05-12-2023

Thanks Bill

---

RE: New design for LED tail light - pairodice - 09-16-2024

I read through this but don’t see a link to the bulbs being used - please send and let me know if these fit in the original frame or do I need to download a file from somewhere?

---

RE: New design for LED tail light - bikestuff - 09-16-2024

The original “bulbs” are not readily available. The new lights are an entire replacement of all the individual light units AND the bezels.

The idea was to use more readily available light units. These are LED and WILL NOT fit with existing bezels.

Hope this helps.

Bill

---

RE: New design for LED tail light - markkitch - 03-20-2026

Hi guys, 

I upgraded my taillights, I had done the same to my wanderlodge. I have the dwg/step file for the aluminum bracket which I am happy to give to anyone wanting to do the same. You can get these cut and powder coated for around $160 - $200 for the pair from any of the online metal cutting guys. I purchased bulbs on Amazon:
https://www.amazon.com/dp/B0F9TX8CTT?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
https://www.amazon.com/dp/B0F9TWVDS1?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Should anyone need them, I removed my old lights and metal brackets, all work. Message me if you want them.

---