Brand of motorized lift - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Televisions, Satellite, Audio Visual Stuff (https://newellgurus.com/forumdisplay.php?fid=10)
+--- Thread: Brand of motorized lift (/showthread.php?tid=1625)

---

RE: Brand of motorized lift - Richard - 07-05-2014

Chester,

You may be able to use the existing cable but all the setups I have seen recommend an ultra low loss cable.

I am going to use my existing repeater which accepts a RP SMA male antenna connection. I will run new cable. The existing access hole for the sat dish cables is directly overhead the TV so it's not a tough job to run new cable. I have to get on the roof to install the antenna on the old braund mast.

Yep a new controller is around two hundred bucks. Yikes. Now that I have the schematic I am going to use a auto window switch to see if I can just get it to go up and down. Stay tuned.

---

RE: Brand of motorized lift - pairodice - 05-14-2019

Richard, how did you solve the problem with your antenna?  I would like to get my Braun working - did you get a new controller box and did that solve the problem?  What did you use for a wifi booster?

---

RE: Brand of motorized lift - Richard - 05-14-2019

I used a automobile window switch for the antenna. The wi fi booster inused is five years old so i am sure better technology is out there

---