HWH Leveling System Puzzler - Printable Version
+- Newell Gurus (
https://newellgurus.com)
+-- Forum: Technical Discussions (
https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Suspension/Tires/Wheels (
https://newellgurus.com/forumdisplay.php?fid=5)
+--- Thread: HWH Leveling System Puzzler (
/showthread.php?tid=2132)
RE: HWH Leveling System Puzzler -
Richard - 05-12-2015
Being the redneck I am, I wouldn't pull the bolts. Carefully drill a hole and just kiss the bolt with the bit. I would use a very small bit, maybe 1/8 or so. Then counterbore with the appropriate bit to tap for the zerk. I wouldn't do this for a high speed bearing or bushing at all, but a small burr in a high load low speed bushing wouldn't be an issue in my way of thinking. Of course flush the hole thoroughly so that you don't force any shavings into the bushing.