You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
2004 DDEC Underdash connector - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Engine and Transmission Monitoring Systems (https://newellgurus.com/forumdisplay.php?fid=58)
+--- Thread: 2004 DDEC Underdash connector (/showthread.php?tid=3591)



2004 DDEC Underdash connector - Fulltiming - 06-27-2017

I fellow Newell owner who is not at his coach would like to order a VMSpc. Based on Bill Johnson's comments, his under dash connector is not a standard DIN plug but a square connector and I believe uses the 4 wire system. 

Does anyone with a 2004 model Newell know which connector their coach has? A quick response would be greatly appreciated.


RE: 2004 DDEC Underdash connector - ccjohnson - 06-27-2017

Michael,
If I'm not mistaken Bill has a CAT engine. Not sure if it would be the same as DDEC.


RE: 2004 DDEC Underdash connector - Fulltiming - 06-27-2017

You are correct Clint. Thanks for reminding me. Anyone with a 2004 with a Detroit Diesel Series 60 that can help provide information would be appreciated.


RE: 2004 DDEC Underdash connector - Fulltiming - 06-27-2017

As a follow-up, it appears to be a DIN 9 pin plug but only using the 4 wire configuration.


RE: 2004 DDEC Underdash connector - Yachts - 06-30-2017

Mine is round and is on the floorboard next to the drivers seat