Water seperator fix on Conmet sight bowl. - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Fuel System (https://newellgurus.com/forumdisplay.php?fid=74)
+--- Thread: Water seperator fix on Conmet sight bowl. (/showthread.php?tid=6059)

---

Water seperator fix on Conmet sight bowl. - KTMADV - 05-01-2021

I have a water seperator on my 1984 Classic and wanted to replace the plastic bowl on the Conmet that was cracked so I made a new bottom.  I used some metal and tapped a new plug on the bottom and used a plasma cutting table to make perfect circle.

---

RE: Water seperator fix on Conmet sight bowl. - Fulltiming - 05-01-2021

Great job Caesar.

---

RE: Water seperator fix on Conmet sight bowl. - Mageeacres - 05-02-2021

Awesome mcgyver move. Just wondering if the replacement clear bowl is still available somewhere? I’m sure complete units are from other vendors.

---

RE: Water seperator fix on Conmet sight bowl. - Guy - 07-12-2021

I too have the same generator fuel/water seperator. Has anyone replaced it with a modern unit? I would love to find a unicorn and do it with a "plug and play" without having to disturb and reroute or change fuel lines or fittings. ( Don't judge, I know I am lazy) 

---

RE: Water seperator fix on Conmet sight bowl. - Tf175 - 07-12-2021

            Guy , I installed Hanlv separators last year,  sourced from ebay . Under $70 each , Parker knock off . At 180 gph flow they are overkill , especially for the generator. I like the replaceable filter , the Conmet units have no filtration. I'm afraid there have been no Unicorn sightings , the Hanlv is not a bolt on plug and play. I made a bracket to mount them and worked out the plumbing , not a huge deal as the ports are SAE .

---