Dash Air Gauges - Printable Version
+- Newell Gurus (
https://newellgurus.com)
+-- Forum: Technical Discussions (
https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Air Operated Systems and Leaks (
https://newellgurus.com/forumdisplay.php?fid=33)
+--- Thread: Dash Air Gauges (
/showthread.php?tid=6193)
RE: Dash Air Gauges -
johnkosir - 07-26-2021
Yes you are on the right track that check valve will bleed off the head preasure making it easier for the compressor to start. I think 3/8” is a little big. Newell has done it many different was over the years using electric solenoid valves I don’t know how your coach was done originally
RE: Dash Air Gauges -
HoosierDaddy - 07-26-2021
https://tricitytoolparts.com/products/e100957-pressure-switch-125-95-psi-craftsman-air-compressor
I installed a pressure switch with an unloader valve along with the check valve when I rebuilt my air system.
RE: Dash Air Gauges -
Tfrazier - 07-30-2021
Thanks to everyone for all the advice and feedback.
Yesterday, I changed out the 3 push-on fittings with compression fittings on the Air Control Valve that operates the generator slide. Only one of them was leaking but I changed the all out anyway. I replaced the ball valve with a new check valve on the compressor.
End result, no more leaks. This morning I checked the dash air gauges and both were at the same level.
Another satisfied customer. Thanks again
RE: Dash Air Gauges -
encantotom - 07-30-2021
awesome. and thanks for not calling me in the middle of the night.....ha without knowing
tom
RE: Dash Air Gauges -
Tfrazier - 07-30-2021
Tom,
Based on our time zone difference, that could happen. Still can't figure out how I butt dialed you yesterday, but at least it was in the middle of the day.
Thanks again.