ABS gap - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Suspension/Tires/Wheels (https://newellgurus.com/forumdisplay.php?fid=5)
+--- Thread: ABS gap (/showthread.php?tid=6268)

---

ABS gap - cfree3 - 08-24-2021

Does anyone know what the gap should be between the ABS sensor and the toothed ring?

Thanks for the help!

---

RE: ABS gap - bikestuff - 08-24-2021

I am not sure what problem you are chasing but the abs sensor should be pushed all the way against the ring.  When the wheels turn they will push the sensor away from the ring leaving a very small gap. According the instructions a gap of 0.04” is allowable.


Here are generic truck instructions…(I will add the document to our library)

WABCO ABS Wheel sensor replacement

bill

---