6V92TA - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Parts is parts (https://newellgurus.com/forumdisplay.php?fid=28)
+--- Forum: Parts Swap/Giveaway/Sell (https://newellgurus.com/forumdisplay.php?fid=71)
+--- Thread: 6V92TA (/showthread.php?tid=6860)

---

6V92TA - [email protected] - 07-09-2022

I am repowering  
with an isc cummins so have a low mile low (17k)hour non pump truck 6v92TA for sale. I also have the allison 5 speed from my old coach that can go with it .  I paid 8500 will take 6500 for both. Direct drop in replacement for most of the early 80s classics! Located in NH could deliver for free in North East or ship at buyers expense. I can be reached through DM if interested . Thanks SJ

---

RE: 6V92TA - Guy - 07-09-2022

Please keep us updated on your repower. Good luck.

---

RE: 6V92TA - [email protected] - 07-22-2023

Waiting on the wiring harness installation....lack of labor in the world these days is everywhere!

---

RE: 6V92TA - Little - 07-22-2023

ECM wiring is almost always the issue with conversions lately. Long for the days when 1 wire to the fuel pump and the 855 Cummins was running. Also a thumb screw could over ride the power. Add mechanical temp and oil pressure (or ISSPRO) safety gauges and you were good to go. Good luck with getting it finished. Did you change out the diff as well??

---

RE: 6V92TA - [email protected] - 08-27-2023

(07-22-2023, 08:27 AM)Little Wrote:  ECM wiring is almost always the issue with conversions lately. Long for the days when 1 wire to the fuel pump and the 855 Cummins was running. Also a thumb screw could over ride the power.  Add mechanical temp and oil pressure (or ISSPRO) safety gauges and you were good to go. Good luck with getting it finished. Did you change out the diff as well??

They are actually taking the harness from the American Dram and running it up to the front

---