Macerator Sanicon 600 Turbo Installation Coach 1482 - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Plumbing and fixtures (https://newellgurus.com/forumdisplay.php?fid=9)
+--- Thread: Macerator Sanicon 600 Turbo Installation Coach 1482 (/showthread.php?tid=7886)

---

Macerator Sanicon 600 Turbo Installation Coach 1482 - hypoxia - 03-13-2024

I installed a Sanicon Turbo 600 macerator this week.  I used one for a few years on previous coach, it just seems easier than the Waste Master simply due to length required at many sites.  I have used 200' of macerator sewer line in the past with that system.  Here are my notes for those interested.

---

RE: Macerator Sanicon 600 Turbo Installation Coach 1482 - Jack Houpe - 03-14-2024

Nice write up Jim, I didn't have a lot of luck with the flat hose it kinked up unless it perfectly straight and flat I ended up using a 1 inch bilge pump flexible hose. Now if your going long distance like you did it would be perfect.

---

RE: Macerator Sanicon 600 Turbo Installation Coach 1482 - hypoxia - 03-14-2024

(03-14-2024, 04:24 AM)Jack Houpe Wrote:  Nice write up Jim, I didn't have a lot of luck with the flat hose it kinked up unless it perfectly straight and flat I ended up using a 1 inch bilge pump flexible hose. Now if your going long distance like you did it would be perfect.

Thanks Jack.  I have three 21' lengths of the Sanicon 1.5" flexible hose which works in most cases.  Avoiding kinks is important, I would think the motor would overheat in short order or blow a hose.  When I make a long run such as 200', I try to have someone on the switch and another on hose kink patrol.  While writing this I just realized I should add a water hose connection at the macerator outlet to flush the hose.

---