Wind deflector - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: General and or Other Stuff (https://newellgurus.com/forumdisplay.php?fid=16)
+--- Forum: General (https://newellgurus.com/forumdisplay.php?fid=21)
+--- Thread: Wind deflector (/showthread.php?tid=8078)

---

Wind deflector - BusNit - 07-22-2024

One of my friends owns a Tuning shop for MB's and such. He started making air dams for all cars that need to scoop more air in after they reprogram their ECUs.  I asked if he could make a couple of radius curved thing-a-ma-bobs for my coach. I've been wanting to make something prettier for the front where the solar panels are exposed at the leading edge. In two days they drafted a design and had it in my hands. Today I picked them up along with a piece of 5052 aluminum stock as the main windbreaker.

---

RE: Wind deflector - BusNit - 07-22-2024

I worked on it when the sun went down. That 5052 aluminum stock is a nice hardened alloy. Super light but a pain to cut. I was able to follow the unusual curves of the roof and got it cut very close. It will get Dicor as a final seal and of course paint. For now it's all mocked up sitting loose and waiting for stainless brackets and hardware. That will be tomorrow evenings project!

---

RE: Wind deflector - hypoxia - 07-23-2024

Looks great!

---

RE: Wind deflector - Mib2nd - 07-24-2024

Looks Good!

---

RE: Wind deflector - Jack Houpe - 07-25-2024

Very nice!

---

RE: Wind deflector - BusNit - 07-29-2024

I had the same shop make me a smaller deflector for a clump of wiring which can be seen from the front. They were satellite wires, cable, radio and phone. The only one in use is the radio but I kept the others for future use as they are tucked and rolled under the solar panel. This little deflector cleans up the front. I will have CDI paint it. For now it has a base coat of paint for purdyness.

---