vmspc installation - Printable Version
+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Engine and Transmission Monitoring Systems (https://newellgurus.com/forumdisplay.php?fid=58)
+--- Thread: vmspc installation (/showthread.php?tid=809)
+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Engine and Transmission Monitoring Systems (https://newellgurus.com/forumdisplay.php?fid=58)
+--- Thread: vmspc installation (/showthread.php?tid=809)
RE: vmspc installation - Chester Stone - 05-27-2013
On the 90 to 95 dash, are there switches in the center portion of the dash? If not, I can visualize velcroing a 90 degree support to the top and back of a tablet and let it drape over the dash as long as it does not cover any important switches. Just an idea. I really like mine in my line of vision without having to look in another direction.
RE: vmspc installation - encantotom - 05-27-2013
on the 90 there was switches in the center and a knob. so it wouldnt have fit dead center.
tom
RE: vmspc installation - cdat - 05-27-2013
The only switch that I think would be an issue on mine is the override switch that is in the center and would be covered by a tablet.
RE: vmspc installation - encantotom - 05-27-2013
for me i liked it on the center console. it would have been too hard for me to see on the dash. i like it on a big screen.
all personal preference.
tom
RE: vmspc installation - Chester Stone - 05-28-2013
We can compare when we get to Spearfish. In any event, I am sold on the VMSpc. Finally, I can see my dash without a flashlight. Wish I could hook one up to my Honda Odyssey which is like the Rand-McNally GPS, neither can be viewed on a bright day.
RE: vmspc installation - cdat - 05-28-2013
Thanks
John
RE: vmspc installation - folivier - 05-28-2013
That should be it.
RE: vmspc installation - cdat - 05-28-2013
Thanks
John
RE: vmspc installation - cdat - 05-28-2013
Evidently need to check and see if the coach has the updated software (154), is there a way to do this, or do I need to take it to a shop and have the codes read?
Thanks
RE: vmspc installation - encantotom - 05-28-2013
all i know is that on my 90 it just plugged in and worked.
i have a scanner but i have never looked to see if it shows a version number.
tom