dining table extended - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Interior Things (https://newellgurus.com/forumdisplay.php?fid=6)
+--- Thread: dining table extended (/showthread.php?tid=8291)

---

dining table extended - [email protected] - 12-12-2024

We have a clear Plexiglass rod that appears to support the end of dining table after installing the middle extension. This plexiglass rod however seems to be a few inches too long,so the support is at quite an angle. What am I missing on this setup?
JD

---

RE: dining table extended - Jack Houpe - 12-13-2024

Got any pictures to share? Maybe you'll just have to cut down.

---

RE: dining table extended - Richard - 12-13-2024

My table has a pocket underneath for the rod

---

RE: dining table extended - Wardworks - 12-13-2024

If the flooring has been changed from carpet to wood or tile it will need to be shortened

---

RE: dining table extended - [email protected] - 12-13-2024

far as I can tell it has the original carpet, which is why makes no sense. I will call Newell.

---

RE: dining table extended - smagown - 12-13-2024

There should be a round slot under the table to help make it a little shorter.

---

RE: dining table extended - justinn - 12-17-2024

(12-13-2024, 11:03 AM)[email protected] Wrote:  far as I can tell it has the original carpet, which is why makes no sense. I will call Newell.

Do you happen to have a Murphy bed with a table/desk on the underside of it? I have 2 of the plexiglass supports, and they are 2 different lengths. One is for the desk that flips up from the Murphy bed, and the other is for dinette.

Justin

---