Front six-pack rebuild - Printable Version
+- Newell Gurus (
https://newellgurus.com)
+-- Forum: Technical Discussions (
https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Air Operated Systems and Leaks (
https://newellgurus.com/forumdisplay.php?fid=33)
+--- Thread: Front six-pack rebuild (
/showthread.php?tid=8755)
Front six-pack rebuild -
hbens - 11-17-2025
I have been hesitant at rebuilding my front six pack because I didn't want to unbolt the manifold to do it.
I drove up on blocks under the front wheels, raised the coach all the way up, and put jack stands under the frame.
I released the air out of my suspension and got to work.
I marked each set of wires before removing the coil from the solenoid. Bottom Front, Bottom Middle, Bottom Rear, etc.
Then I removed the solenoid and rebuilt each as it was removed so I could tell if there was an issue on any one circuit.
After rebuilding all 6 I reinstalled them in the reverse order. TR, BR, TM, BM, TF, and BF.
I wish I had done this before we sold our house and lost my private parking spot.
Jeff at Geno's garage relocated his six pack to the hydraulic bay. I will probably make this mod in the future. That way troubleshooting will be easier and I will have access to each solenoid without removing all of them.