Pocket door 90 deg fittings? - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Air Operated Systems and Leaks (https://newellgurus.com/forumdisplay.php?fid=33)
+--- Thread: Pocket door 90 deg fittings? (/showthread.php?tid=8765)

---

Pocket door 90 deg fittings? - Wanderman - 11-22-2025

Hey All!

Can someone tell met exactly what size the pocket door 90 degree fittings to the cylinder are.. Looks like 1/8" OD tube, but what brass thread into the solenoid body?

And is there anyplace that would have them on a Sunday? I'm leaving for a Thanksgiving trip on Monday morning!

Thanks!!!

---

RE: Pocket door 90 deg fittings? - Latitude 28 - 11-23-2025

Take a look at you passenger side air dump valve to see if they are the same.  As a work around, if they are the same size, deactivate the passenger valve and use one of them till you can get another.

---

RE: Pocket door 90 deg fittings? - Wanderman - 11-23-2025

They are not the same, my dump valve ones are 1/4 OD tube....

---

RE: Pocket door 90 deg fittings? - encantotom - 01-02-2026

I just replaced one. It is metric. M10-1 thread and is unobtainium. I bought a m10 to 1/8 npt adapter and put a 1/8 90 with a 1/8 npt to 1/8 tubing push to connect

Tom

---

RE: Pocket door 90 deg fittings? - Wanderman - 01-02-2026

Looks Like the m10-1 is the same as

Equivalent Inch Thread 3/8 - 24 UNF

---