Lost lights, but fuses are working - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Electrical (https://newellgurus.com/forumdisplay.php?fid=30)
+--- Thread: Lost lights, but fuses are working (/showthread.php?tid=8951)

---

Lost lights, but fuses are working - LaurenWeliver - 05-06-2026

Hey All,
So I plugged in a 12V battery into the old cigarette style port under our (2008) and it shut the whole system down. 

After a system restart, the salon and d/s slide lights sections would not come on although the the switch illuminated on. I went and checked the fuses and they were okay. I pressed the manual override switch on the fuses and they do work. 

So the panel switch illuminates on, the fuses are good, but they
don’t turn on. The fuse override does provide power to lights so they do still work. 

Is there some sort of relay that was blown when I plugged in that battery charger? Any insight would greatly be appreciated.

---

RE: Lost lights, but fuses are working - CaptainGizmo - 05-09-2026

Hi,

You've posted this TWICE, so I'll respond to this one since it's the latest. You may be best to delete the other one.

I'm trying to follow what you did, and why. Maybe your were trying to charge the 12v Battery pack? If so, it sure sounds as if there was reverse current of some sort that may have bumped the system enough to trigger the SPYDER relay system.

While you didn't blow fuses, the SPYDER system may need to be rebooted. It will, on occasion, lose its syncing.

The standard way to do that is to pull these fuses and wait 30 seconds before re-inserting:

610, 611, 612, and 624

Order doesn't matter.

---