Removing the dash - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: General and or Other Stuff (https://newellgurus.com/forumdisplay.php?fid=16)
+--- Forum: General (https://newellgurus.com/forumdisplay.php?fid=21)
+--- Thread: Removing the dash (/showthread.php?tid=9059)

---

Removing the dash - pairodice - 08-13-2026

I need to access my heater core as it is leaking and I think the valve for the ac to heat is not working. 
What is the process for removing the dash please?

---

RE: Removing the dash - Richard - 08-17-2026

You might be the first DIY.

Take good notes for the ones who follow.

---

RE: Removing the dash - bikestuff - 08-17-2026

(08-13-2026, 09:40 AM)pairodice Wrote:  I need to access my heater core as it is leaking and I think the valve for the ac to heat is not working. 
What is the process for removing the dash please?

I saw Newell work on the same vintage and they were able to raise the dash up and set it on blocks.   I seem to remember that they had 6-8" of clearance under the dash.  I would look in the hand hole that is behind the trim on the dash to the left of the fuse bay.  The trim piece is attached with double sided tape.

   

---