1991 Transmission 5 pole relay - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Electrical (https://newellgurus.com/forumdisplay.php?fid=30)
+--- Thread: 1991 Transmission 5 pole relay (/showthread.php?tid=9064)

---

1991 Transmission 5 pole relay - Dystrakti0n - 08-16-2026

I am having a heck of a time finding a replacement for the Trans relay. It’s stamped with 150-65 150-905 12V date code is 8914. Pins 1-> 2 reads 0.02 ohms, and when it was plugged in, all spades were reading 13.4v to ground. Any idea on where to find a cross where I don’t have to rewire/remap the circuit?

I’m about to pull one of the “non-essential “ relays to get to town to dump and get propane.         

---

RE: 1991 Transmission 5 pole relay - Richard - 08-16-2026

A number of years ago, one of our members sourced those ‘can’ relays from NAPA.

Most just use a modern Bosch cube relay with the screw tab on top. For example https://www.summitracing.com/parts/bch-0986332402?seid=srese1&gad_source=1&gad_campaignid=1046160366&gclid=Cj0KCQjwv4XUBhDBARIsAE6bQUSiDBgi0k6Shy2T74zp4f9ZdS1j0xvIZxHLp-BYxx_0xRXKlUXOIXQaAmpwEALw_wcB

---