You are not logged in or registered. Please login or register to use the full functionality of this board...


OTA TV and Satellite Antenna
#21

So if I put 12volts to the green white (assuming that is the green and white striped wires) then the antenna should move up/down?

Karen & Adrian Abshire 
1998 2 slide 45' Newell Coach 498 
Prior: 1985 Foretravel ORED 35, 1988 38' Foretravel U280, 2000 Foretravel 42' U320, 1990 Bluebird Wanderlodge WB40
Reply
#22

So where is the power supply located for the Braund antenna? Is that what the 12-volt cigarette plug is for?

Karen & Adrian Abshire 
1998 2 slide 45' Newell Coach 498 
Prior: 1985 Foretravel ORED 35, 1988 38' Foretravel U280, 2000 Foretravel 42' U320, 1990 Bluebird Wanderlodge WB40
Reply
#23

IIRC, there was 12V coming into the Braun controller from the chassis.

The cig lighter is part of the antenna signal booster. Those are/were common in RVS as a 12v powered signal booster. Almost all of them had a cig lighter because a lot of 12V RV based TVs used a cig lighter plug in for power.

So, if you can't find 12v at the braun controller by using your voltmeter, you can find it coming into the antenna booster by using your voltmeter.

Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home Cool )
Reply
#24

Thanks Richard. I tried adding 12-volt using a DC power supply but not sure 3-5 amps is enough to power the antenna. I'm planning to get a decent ladder this week to get on the roof.

Karen & Adrian Abshire 
1998 2 slide 45' Newell Coach 498 
Prior: 1985 Foretravel ORED 35, 1988 38' Foretravel U280, 2000 Foretravel 42' U320, 1990 Bluebird Wanderlodge WB40
Reply
#25

You should have 12v at the braun controller. It came from the factory that way or it wouldn't have ever worked. Confirm you do have 12v with voltmeter before concluding the motor is flummoxed.

Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home Cool )
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)