You are not logged in or registered. Please login or register to use the full functionality of this board...


Foam beak and why you want one
#1

https://www.amazon.com/Foambeak-Vertical...183&sr=8-2

For a number of years I have tried a dozen different techniques for reapplying the foam that is inside the wheel wells, and on the bottom of bay floors. Nothing I tried was efficient, worked with a flip, and didn’t result in most of the foam sticking to me. Until I stumbled in this little device. 

The way I used it was that I inserted about 10 inches of tubing between the foam can nozzle and the beak. That way you can hold the can completely inverted, and maneuver the beak with ease. The way to use the beak is to hold it flat against the overhead or vertical surface and move it along at a moderated rated while holding straw in the triggered position. The foam will stick to the surface and then expand to about 1.5 inches thick. One can of the standard Lowe’s/HD foam will cover about 2 square ft. 

You won’t really appreciate this gadget until you have tried to apply foam from a can onto a overhead surface.

Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home Cool )
Reply
#2

Cool idea
I have remade/repaired bottom of
Battery compartment
Will need this

George

Georgeb
Coach 385
Toad Mini Cooper 
Reply
#3

https://www.amazon.com/Convenience-Produ...B00BCMFTE2

Great idea, Richard. I got one of these a couple years ago. A bit more $ but you can use a partial can of foam and save the remaining for a later project.

1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)