<![CDATA[Newell Gurus - Interior Things]]>

<![CDATA[Newell Gurus - Interior Things]]> https://newellgurus.com/ Thu, 04 Jun 2026 02:22:30 +0000 MyBB <![CDATA[Entry Door Limited Slip Tape]]> https://newellgurus.com/showthread.php?tid=7871 Fri, 08 Mar 2024 22:33:38 +0000 Latitude 28]]> https://newellgurus.com/showthread.php?tid=7871 Does anyone know the part number of the entry door threshold "silver" limited slip tape? This tape is not as aggressive as the steps non-skid sheets but something less.

IMG_5422.jpg Size: 1.35 MB Downloads: 86

]]> Does anyone know the part number of the entry door threshold "silver" limited slip tape? This tape is not as aggressive as the steps non-skid sheets but something less.

IMG_5422.jpg Size: 1.35 MB Downloads: 86

]]> <![CDATA[Roller front windshield blinds not powering up.]]> https://newellgurus.com/showthread.php?tid=7724 Wed, 06 Dec 2023 00:01:09 +0000 BusNit]]> https://newellgurus.com/showthread.php?tid=7724

IMG_7120.jpeg Size: 3.51 MB Downloads: 133

IMG_7121.jpeg Size: 1.48 MB Downloads: 136

]]>

IMG_7120.jpeg Size: 3.51 MB Downloads: 133

IMG_7121.jpeg Size: 1.48 MB Downloads: 136

]]> <![CDATA[Hidden oasis under the steps?]]> https://newellgurus.com/showthread.php?tid=6573 Sun, 23 Jan 2022 14:54:13 +0000 BusNit]]> https://newellgurus.com/showthread.php?tid=6573

IMG_9159.jpg Size: 3.88 MB Downloads: 237

IMG_9160.jpg Size: 3.46 MB Downloads: 234

]]>

IMG_9159.jpg Size: 3.88 MB Downloads: 237

IMG_9160.jpg Size: 3.46 MB Downloads: 234

]]> <![CDATA[Doghouse - Center console]]> https://newellgurus.com/showthread.php?tid=6423 Mon, 01 Nov 2021 04:03:57 +0000 Tfrazier]]> https://newellgurus.com/showthread.php?tid=6423
Does anyone know if there are replacements for something like this or any suggestions on how I might be able to repair it. I would prefer to just replace it but its probably wishful thinking..

IMG_0957.jpg Size: 63.45 KB Downloads: 149

Trim close up.jpg Size: 75.86 KB Downloads: 162

]]>
Does anyone know if there are replacements for something like this or any suggestions on how I might be able to repair it. I would prefer to just replace it but its probably wishful thinking..

IMG_0957.jpg Size: 63.45 KB Downloads: 149

Trim close up.jpg Size: 75.86 KB Downloads: 162

]]> <![CDATA[New Flooring for 300]]> https://newellgurus.com/showthread.php?tid=6422 Mon, 01 Nov 2021 03:44:20 +0000 Tfrazier]]> https://newellgurus.com/showthread.php?tid=6422
Finished up the new floor today and thought I would share some pics. I must admit that this project was a bit more difficult (okay, a lot more difficult) than I anticipated. It took considerably more time than I budgeted for and I can certainly understand why professional installers charge what they do. We had a couple of estimates in the 5K-7K range, which at the time, I thought was outrageous. I still wouldn't pay that much for a new floor in my 30 year old coach, but I would charge that much (or more), if I had to do the install for someone else.

After all the complaining about how difficult it was and how long it took, I have to say it was well worth it. The new floor looks great and really gives the interior a fresh look. I know the carpet that Newell used was very high quality but it was 30 years old and it was time to go.

Thanks to everyone for previous posts on this topic and for those that responded to some of the questions I had along the way.

1.JPG Size: 117.11 KB Downloads: 273

2.jpg Size: 97.71 KB Downloads: 278

3.JPG Size: 56.44 KB Downloads: 270

4.jpg Size: 70.43 KB Downloads: 244

5.JPG Size: 115.16 KB Downloads: 235

6.jpg Size: 103.34 KB Downloads: 88

7.jpg Size: 106.11 KB Downloads: 90

8.JPG Size: 101.07 KB Downloads: 85

9.jpg Size: 70.81 KB Downloads: 74

]]>
Finished up the new floor today and thought I would share some pics. I must admit that this project was a bit more difficult (okay, a lot more difficult) than I anticipated. It took considerably more time than I budgeted for and I can certainly understand why professional installers charge what they do. We had a couple of estimates in the 5K-7K range, which at the time, I thought was outrageous. I still wouldn't pay that much for a new floor in my 30 year old coach, but I would charge that much (or more), if I had to do the install for someone else.

After all the complaining about how difficult it was and how long it took, I have to say it was well worth it. The new floor looks great and really gives the interior a fresh look. I know the carpet that Newell used was very high quality but it was 30 years old and it was time to go.

Thanks to everyone for previous posts on this topic and for those that responded to some of the questions I had along the way.

1.JPG Size: 117.11 KB Downloads: 273

2.jpg Size: 97.71 KB Downloads: 278

3.JPG Size: 56.44 KB Downloads: 270

4.jpg Size: 70.43 KB Downloads: 244

5.JPG Size: 115.16 KB Downloads: 235

6.jpg Size: 103.34 KB Downloads: 88

7.jpg Size: 106.11 KB Downloads: 90

8.JPG Size: 101.07 KB Downloads: 85

9.jpg Size: 70.81 KB Downloads: 74

]]> <![CDATA[Newell Furniture supplier]]> https://newellgurus.com/showthread.php?tid=6010 Fri, 02 Apr 2021 01:48:05 +0000 Whitty10]]> https://newellgurus.com/showthread.php?tid=6010
Wanted to see if anyone knew of the company Newell uses for their interior furniture? I’m thinking about replacing our sofa and wanted to go back w same company.]]>
Wanted to see if anyone knew of the company Newell uses for their interior furniture? I’m thinking about replacing our sofa and wanted to go back w same company.]]> <![CDATA[RV Flooring]]> https://newellgurus.com/showthread.php?tid=5650 Sun, 30 Aug 2020 16:22:40 +0000 Brent Ekberg]]> https://newellgurus.com/showthread.php?tid=5650

IMG_2722.jpg Size: 26.17 KB Downloads: 373

PNG image (1).png Size: 76.25 KB Downloads: 372

]]>

IMG_2722.jpg Size: 26.17 KB Downloads: 373

PNG image (1).png Size: 76.25 KB Downloads: 372

]]> <![CDATA[Bill Johnsons' flooring]]> https://newellgurus.com/showthread.php?tid=4794 Sun, 24 Feb 2019 13:55:52 +0000 Ernie]]> https://newellgurus.com/showthread.php?tid=4794

DSC00169.JPG Size: 1.65 MB Downloads: 638

DSC00162.JPG Size: 1.94 MB Downloads: 653

]]>

DSC00169.JPG Size: 1.65 MB Downloads: 638

DSC00162.JPG Size: 1.94 MB Downloads: 653

]]> <![CDATA[Roof Hatch Small Leak]]> https://newellgurus.com/showthread.php?tid=4301 Fri, 15 Jun 2018 14:42:05 +0000 Floridian]]> https://newellgurus.com/showthread.php?tid=4301
Thanks!]]>
Thanks!]]> <![CDATA[Interior Materials]]> https://newellgurus.com/showthread.php?tid=4166 Tue, 24 Apr 2018 04:18:20 +0000 cknuth]]> https://newellgurus.com/showthread.php?tid=4166

IMG_7084 (1).jpg Size: 2.01 MB Downloads: 217

IMG_7094 (1).jpg Size: 1.75 MB Downloads: 220

IMG_7084 (1).jpg Size: 2.01 MB Downloads: 217

IMG_7094 (1).jpg Size: 1.75 MB Downloads: 220

It seems likely that the information I'm looking for is on the Forums somewhere, but my Junior Guru search skills haven't yielded results yet. I'm doing some minor repairs and modifications to the interior and looking for the original sources of the following:

Laminate - beige textured (attached) Wilsonart. Color/style number?

Ribbed outdoor carpet, used on all the cabinets' fuzzy interiors and shelves - manufacturer/item number?

Beige naugahyde, covering the walls and ceiling - manufacturer/item number?

Thanks for you help!]]> <![CDATA[Cessna shower with curved door #0724]]> https://newellgurus.com/showthread.php?tid=3519 Thu, 25 May 2017 13:03:40 +0000 Golfnick]]> https://newellgurus.com/showthread.php?tid=3519 Cesana model 0724

Bob Nicholson
2000 Monaco Signature
Golfnick.nicholson@gmail.com]]> Cesana model 0724

Bob Nicholson
2000 Monaco Signature
Golfnick.nicholson@gmail.com]]> <![CDATA[Re-stringing cellular blinds]]> https://newellgurus.com/showthread.php?tid=1211 Mon, 20 Jan 2014 17:34:38 +0000 folivier]]> https://newellgurus.com/showthread.php?tid=1211
ACCORDIAN WINDOW BLINDS
To restring:
Need to measure the window. You will need length of string equal to:
2X height + 4X width + about 12” (to tie off)
Remove shade from window, remove end caps and the top and bottom rails being careful to not lose the small plastic guides at the top and bottom of the shades. There should be a small plastic guide, where the string enters the shade top and bottom, which slides onto the rail. There is also a small plastic ring where the string goes through the bottom wooden window sill. The string also is threaded through the end cap of the rails. Also remove the lift handles from the bottom rail.
Find the mid-point of the string, this will be placed in the middle if the top rail of the shade. Gather the shade (closed) and secure with a rubber band or tie of some sort to keep it from opening up. Thread the string through the plastic guides for the top rail and down both sides of the shade (from top to bottom). Slide the top rail back onto the blind.
Thread string through plastic guide for bottom rail on both sides.
Run string across bottom of shade to opposite side (from both sides). Both strings will sit in the bottom rail.
Slide bottom rail back onto blind. Be sure to slide from the end where the metal slat is rounded.
Run string through end cap (from shade out of cap). Replace the lift handles. Run the string down through plastic guide of the window sill.
Run string across from both sides to center (under window sill) to secure and tie off.
NOTES:
The string should be as tight as you can get it. Be sure blind is all the way up before you tie the string off, this will allow you to tighten the string a little more.
If you need to remove the metal slat in the bottom of the blind, note that one end is rounded and the other end is cut (the corners are square). Also note whether the metal slat is flat or has a slight curve to it. When replacing the metal slat if it is flat, you should use some sort of bar or rounded rail to obtain a slight curve to the slat. This will assist in sliding the metal slat through the fabric. Also be sure to slide from the rounded end of the metal slat. If you insert the metal slat from the “cut end” it will tear the fabric of the shade.

Parts of the blind system:
Shade
String
Brackets attached to top of window sill
Top rail
2 end caps (for top rail)
2 plastic guides which slide into the top rail
Bottom rail
2 end caps (for bottom rail)
2 plastic guides which slide into the bottom rail
2 plastic guide rings which fit into the bottom sill
2 lift handles screwed into the bottom rail

PLEASE NOTE:
THESE ARE JUST MY NOTES FROM OUR EXPERIENCE RESTRINGING OUR BLIND WITH HELP FROM OUR FRIENDS. WE DID NOT OBTAIN THIS INFORMATION FROM ANY SOURCE. YOU MAY FIND THIS TO BE HELPFUL OR YOU MAY HAVE A MUCH BETTER WAY OF DOING THIS.]]>
ACCORDIAN WINDOW BLINDS
To restring:
Need to measure the window. You will need length of string equal to:
2X height + 4X width + about 12” (to tie off)
Remove shade from window, remove end caps and the top and bottom rails being careful to not lose the small plastic guides at the top and bottom of the shades. There should be a small plastic guide, where the string enters the shade top and bottom, which slides onto the rail. There is also a small plastic ring where the string goes through the bottom wooden window sill. The string also is threaded through the end cap of the rails. Also remove the lift handles from the bottom rail.
Find the mid-point of the string, this will be placed in the middle if the top rail of the shade. Gather the shade (closed) and secure with a rubber band or tie of some sort to keep it from opening up. Thread the string through the plastic guides for the top rail and down both sides of the shade (from top to bottom). Slide the top rail back onto the blind.
Thread string through plastic guide for bottom rail on both sides.
Run string across bottom of shade to opposite side (from both sides). Both strings will sit in the bottom rail.
Slide bottom rail back onto blind. Be sure to slide from the end where the metal slat is rounded.
Run string through end cap (from shade out of cap). Replace the lift handles. Run the string down through plastic guide of the window sill.
Run string across from both sides to center (under window sill) to secure and tie off.
NOTES:
The string should be as tight as you can get it. Be sure blind is all the way up before you tie the string off, this will allow you to tighten the string a little more.
If you need to remove the metal slat in the bottom of the blind, note that one end is rounded and the other end is cut (the corners are square). Also note whether the metal slat is flat or has a slight curve to it. When replacing the metal slat if it is flat, you should use some sort of bar or rounded rail to obtain a slight curve to the slat. This will assist in sliding the metal slat through the fabric. Also be sure to slide from the rounded end of the metal slat. If you insert the metal slat from the “cut end” it will tear the fabric of the shade.

Parts of the blind system:
Shade
String
Brackets attached to top of window sill
Top rail
2 end caps (for top rail)
2 plastic guides which slide into the top rail
Bottom rail
2 end caps (for bottom rail)
2 plastic guides which slide into the bottom rail
2 plastic guide rings which fit into the bottom sill
2 lift handles screwed into the bottom rail

PLEASE NOTE:
THESE ARE JUST MY NOTES FROM OUR EXPERIENCE RESTRINGING OUR BLIND WITH HELP FROM OUR FRIENDS. WE DID NOT OBTAIN THIS INFORMATION FROM ANY SOURCE. YOU MAY FIND THIS TO BE HELPFUL OR YOU MAY HAVE A MUCH BETTER WAY OF DOING THIS.]]> <![CDATA[Cesana Curved Shower parts list]]> https://newellgurus.com/showthread.php?tid=26 Sun, 29 Jul 2012 20:18:15 +0000 encantotom]]> https://newellgurus.com/showthread.php?tid=26
the parts are very very expensive.

newell also sells a CNC homemade lexan locking piece that you hang over the door to lock it so it wont move while driving. i will take some pictures and post when i can. 15 dollars each.

tom

072x Circle cesana shower door.pdf Size: 54.95 KB Downloads: 378

Serie Circle_Radius_spare parts2.pdf Size: 196.64 KB Downloads: 349

Circle cesana shower door.pdf Size: 720.15 KB Downloads: 246

cesana shower enclosure assembly instructions.pdf Size: 884.51 KB Downloads: 268

2008 cesana shower parts price list.PDF Size: 22.6 KB Downloads: 263

]]>
the parts are very very expensive.

newell also sells a CNC homemade lexan locking piece that you hang over the door to lock it so it wont move while driving. i will take some pictures and post when i can. 15 dollars each.

tom

072x Circle cesana shower door.pdf Size: 54.95 KB Downloads: 378

Serie Circle_Radius_spare parts2.pdf Size: 196.64 KB Downloads: 349

Circle cesana shower door.pdf Size: 720.15 KB Downloads: 246

cesana shower enclosure assembly instructions.pdf Size: 884.51 KB Downloads: 268

2008 cesana shower parts price list.PDF Size: 22.6 KB Downloads: 263

]]>