Cutting down the salon table - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Interior Things (https://newellgurus.com/forumdisplay.php?fid=6)
+--- Thread: Cutting down the salon table (/showthread.php?tid=2969)

---

Cutting down the salon table - encantotom - 07-12-2016

for some reason, the counter on the small table behind the passenger seat had a huge overhang on the front towards the passenger seat.  it makes the seat hard to turn around and the seat hits it.  

so....figured i would cut it down.  there is a corian fabricator very near to our place here in the boonies so he is cutting it down in place.  (we couldnt get it off without breaking it).

thought it would be easy and it is triple edged and looked solid.  ends up to save a pound or two, there is a hollow section that happens to be right where i needed a solid edge.  

so, he is going to fill it in with pieces of what he cut off and then bull nose the edge to match the others.  

i tented off the area, but it still made a real mess....

he will come back on thursday to finish it.  

tom

---

RE: Cutting down the salon table - Fulltiming - 07-12-2016

That doesn't surprise me. Every time I get into something like that, it is a bigger deal than I expected. Fortunately you have someone that knows what they are doing handling it so it should turn out great.

---

RE: Cutting down the salon table - pairodice - 07-12-2016

Nice, you are braver than I am!

---

RE: Cutting down the salon table - encantotom - 07-12-2016

Worst case is I have a whole new top made

Tom

---