07-18-2014, 05:51 PM
Tom,
I am in a no phone area in north Louisiana for two days. PM me your phone and I will call you when I am back in civilization again.
If you can do without your burner for a few days, I can help you send the burner and control box to Roger Berke for a through going over and service. You would want to replace the fuel filter and clean the combustion chamber using a long handled wire brush. But Roger would do the crucial part of servicing the burner and checking it out
There is a flat fee of $200 plus parts including shipping. Roger will send a UPS label so you would be able to ship it easily.
I can describe the combustion chamber cleaning part which is also easy for you to do. A 10 mm socket is needed to loosen and then tighten the J-bolts that hold the burner in place. Again, I can describe how you would remove the burner. I can even describe the Annual Service process or you could contact Chester Stone for a DVD of my Annual Service Demonstration he made of the seminar at the Table Rock Lake rally.
You are most welcome to plan a trip to the Houston area and I will fix you up personally. We would have a great visit.
If you have someone else service it, you and he might call me for directions as I can share all the steps so nothing is missed due to lack of experience performing this task. You would want to be a part of this call so you can monitor his efforts ensuring nothing is skipped. I see skipped stuff by shops all the time.
Some where is all of this there ought to be a way to get you done. All the best.
I am in a no phone area in north Louisiana for two days. PM me your phone and I will call you when I am back in civilization again.
If you can do without your burner for a few days, I can help you send the burner and control box to Roger Berke for a through going over and service. You would want to replace the fuel filter and clean the combustion chamber using a long handled wire brush. But Roger would do the crucial part of servicing the burner and checking it out
There is a flat fee of $200 plus parts including shipping. Roger will send a UPS label so you would be able to ship it easily.
I can describe the combustion chamber cleaning part which is also easy for you to do. A 10 mm socket is needed to loosen and then tighten the J-bolts that hold the burner in place. Again, I can describe how you would remove the burner. I can even describe the Annual Service process or you could contact Chester Stone for a DVD of my Annual Service Demonstration he made of the seminar at the Table Rock Lake rally.
You are most welcome to plan a trip to the Houston area and I will fix you up personally. We would have a great visit.
If you have someone else service it, you and he might call me for directions as I can share all the steps so nothing is missed due to lack of experience performing this task. You would want to be a part of this call so you can monitor his efforts ensuring nothing is skipped. I see skipped stuff by shops all the time.
Some where is all of this there ought to be a way to get you done. All the best.
Rudy Legett
2003 Foretravel U320 4010
ISM11 450 hp Allison 4000R
Factory Authorized Aqua Hot Repair Center
Southeast Texas Area