You are not logged in or registered. Please login or register to use the full functionality of this board...


Sealing the BIG air bag fittings
#6

(04-07-2024, 05:39 PM)[email protected] Wrote:  
(04-06-2024, 04:48 PM)Richard Wrote:  Just file this away in case you ever need it. The air bags on the Ridewell suspension coaches are connected using 1 inch diameter hoses and large 37 degree JIC fittings. They can be a problem to seal back up when changing air bags. Which leads to overtightening, which will be a pain if you ever need to remove the fitting again. I have learned this the hard way. 

I bought some of these. https://flaretite.com/collections/37-jic...ite-coated  as some an experiment. I had the opportunity to play with them today, and installed them on the air bag fittings. I intentionally moderately snugged the fitting nut. Bubble tight at 120 psi. 

Just thought I would pass it on. I had no idea these things existed.

Added to my Newell file. Not seen them for this application, but I did buy some smaller ones for refrigerant lines. I made some copper refrigerant lines for the Wanderlodge and I found some sealing rings kinda like that. These were made out of some sort of metal with a purple coating on them. 

Here is the kit I am talking about:
https://a.co/d/a5aG4gg
This kit is designed for 45 degree flare and is different than 37 degree flares found in the air and hydraulic system normally found on original "Newell" equipment.  Please be aware.... they may work, but it is not as originally designed.
Reply


Messages In This Thread
Sealing the BIG air bag fittings - by Richard - 04-06-2024, 04:48 PM
RE: Sealing the BIG air bag fittings - by 360 - 04-07-2024, 08:30 AM
RE: Sealing the BIG air bag fittings - by [email protected] - 04-07-2024, 05:39 PM
RE: Sealing the BIG air bag fittings - by Gnawrocki1 - 04-08-2024, 09:12 AM
RE: Sealing the BIG air bag fittings - by [email protected] - 04-08-2024, 09:52 AM
RE: Sealing the BIG air bag fittings - by Jonestead - 04-07-2024, 05:44 PM
RE: Sealing the BIG air bag fittings - by Gnawrocki1 - 04-08-2024, 09:04 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)