03-04-2014, 11:24 AM
I removed the dash cover to stealth mount the VMS PC cords. While in there I removed an old Motorola car phone. Remember those? And a GPS sender with a serial connection, and two generations of obsolete Satellite wiring.
I'll move the CB mounting to the far left. I don't know why Newell mounted in such an obtrusive place right over the accelerator.
I have a couple of push on air fittings on the air brake cylinder which will get replaced.
I will probably take the dash heat damper box out since the fan is squealing. I'll fix the fan, check the box for proper sealing, and clean the coils.
Based on your inside the dash issues in the past, is there anything you would recommend I check or do while it's in pieces?
I'll move the CB mounting to the far left. I don't know why Newell mounted in such an obtrusive place right over the accelerator.
I have a couple of push on air fittings on the air brake cylinder which will get replaced.
I will probably take the dash heat damper box out since the fan is squealing. I'll fix the fan, check the box for proper sealing, and clean the coils.
Based on your inside the dash issues in the past, is there anything you would recommend I check or do while it's in pieces?
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)