You are not logged in or registered. Please login or register to use the full functionality of this board...


Generator blower bearing replacement
#12

Ok, so don't make fun of my welding.

Here are a couple of shots of one side.

   

   

Since the bearing housing is square, it doesn't play well with the tri spoke that holds the original bushing. I left one side intact, and mounted the bearing and housing on the other side. I tacked the rod to the sides of the bearing housing, and then aligned the shaft to get it as perpendicular as possible to the blower housing. I then tacked the rods to the blower housing.

I went to the other side and repeated the same operation. The bearing is free to pivot a little in the housing so again I was careful to maintain the alignment. If you don't get the alignment right, it will be hard to get the pulleys to align in the same plane and the belt will complain.

I never said it was purty.

Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home Cool )
Reply


Messages In This Thread
Generator blower bearing replacement - by Richard - 09-08-2014, 08:35 PM
RE: Generator blower bearing replacement - by encantotom - 09-08-2014, 09:13 PM
RE: Generator blower bearing replacement - by bestgenman - 09-08-2014, 11:00 PM
RE: Generator blower bearing replacement - by HoosierDaddy - 09-09-2014, 03:18 AM
RE: Generator blower bearing replacement - by 77newell - 04-03-2015, 10:06 AM
RE: Generator blower bearing replacement - by Richard - 04-03-2015, 04:48 PM
RE: Generator blower bearing replacement - by 77newell - 04-05-2015, 02:55 AM
RE: Generator blower bearing replacement - by Richard - 04-05-2015, 05:14 AM
RE: Generator blower bearing replacement - by HoosierDaddy - 04-05-2015, 07:07 AM
RE: Generator blower bearing replacement - by Richard - 04-05-2015, 10:06 AM
RE: Generator blower bearing replacement - by 77newell - 04-05-2015, 05:21 PM
RE: Generator blower bearing replacement - by Richard - 04-07-2015, 03:57 PM
RE: Generator blower bearing replacement - by HoosierDaddy - 04-07-2015, 04:50 PM
RE: Generator blower bearing replacement - by 77newell - 04-08-2015, 02:56 AM
RE: Generator blower bearing replacement - by HoosierDaddy - 04-08-2015, 04:09 AM
RE: Generator blower bearing replacement - by Chester Stone - 04-08-2015, 08:25 AM
RE: Generator blower bearing replacement - by 77newell - 04-08-2015, 04:30 PM
RE: Generator blower bearing replacement - by Richard - 04-08-2015, 05:05 PM
RE: Generator blower bearing replacement - by HoosierDaddy - 04-08-2015, 07:22 PM
RE: Generator blower bearing replacement - by 77newell - 04-09-2015, 05:28 AM
RE: Generator blower bearing replacement - by HoosierDaddy - 11-24-2015, 04:51 PM
RE: Generator blower bearing replacement - by HoosierDaddy - 11-29-2015, 11:28 AM
RE: Generator blower bearing replacement - by 77newell - 11-29-2015, 04:19 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)