01-02-2015, 09:15 AM
While we are on the topic, I kept having trouble with the unloader valve on my compressor. It worked, but leaked air. I found this little mechanical unloader device. Load Genie. I was skeptical, but it was cheap so I ordered one. Works like a charm. Just something I thought others might be interested in.
I am thinking about mounting a ping tank for the compressor, and installing the load genie on the bottom of the ping tank to give me automatic water dump each time the compressor cycles. I feel like the aux compressor puts a lot of water in the system. I feel that way cause as I fiddled with the unload valve over the last couple of months, I would have to disconnect the air fitting at the compressor. I did it so much that I no longer bled the system down, I would just unscrew the compression fitting and let it blow. It always amazed me at how much water would blow out the air line.
I am thinking about mounting a ping tank for the compressor, and installing the load genie on the bottom of the ping tank to give me automatic water dump each time the compressor cycles. I feel like the aux compressor puts a lot of water in the system. I feel that way cause as I fiddled with the unload valve over the last couple of months, I would have to disconnect the air fitting at the compressor. I did it so much that I no longer bled the system down, I would just unscrew the compression fitting and let it blow. It always amazed me at how much water would blow out the air line.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home )