09-30-2015, 06:09 AM
Dean,
If it's slightly loose, I will replace with same size stainless, and squirt some Loctite blue on the threads.
If it won't tighten, I size up one diameter, and use an oval head SS stainless. I use the oval head so that the larger head diameter has a smoother look than an oversize flathead would have.
If it's slightly loose, I will replace with same size stainless, and squirt some Loctite blue on the threads.
If it won't tighten, I size up one diameter, and use an oval head SS stainless. I use the oval head so that the larger head diameter has a smoother look than an oversize flathead would have.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home )