02-14-2016, 08:30 AM
"Short Version: The 12V pump does not supply air to the front slide seals."
You have made your search easier by eliminating the 12V system. I would put my leak down tester on the air line right before the shut off valve(if you have one) and the slide seal regulator. This will tell you whether your leak is on the slide seal side, on the air source side, or both. Then finding the leak is just a matter of following air lines and checking fittings & components.
Let us know what you find..................................
You have made your search easier by eliminating the 12V system. I would put my leak down tester on the air line right before the shut off valve(if you have one) and the slide seal regulator. This will tell you whether your leak is on the slide seal side, on the air source side, or both. Then finding the leak is just a matter of following air lines and checking fittings & components.
Let us know what you find..................................
Steve Bare
1999 Newell 2 slide #531