05-03-2016, 10:00 AM
Don, you should disassemble the slack adjusters and completely clean out the old grease. Use a bentonite clay based grease when you put them back together.
http://www.mcmaster.com/#clay-thickened-grease/=1292gqn
The reason for the clay base is to withstand the high temps that the adjuster might see.
http://www.mcmaster.com/#clay-thickened-grease/=1292gqn
The reason for the clay base is to withstand the high temps that the adjuster might see.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home )