10-25-2012, 10:37 AM
Russ,
Thanks for some good tips and toughts on solving thsi problem, I will check the wires for correct voltage.
Also will check the loose wires when we retract the slide next time ( trveling today to Medford aera of Oregon ) will start the engine , have my wife press the switch and if the slide motor wont start , I will check one by one every wire and see if perhaps its the case!
As you noticed I hace two controlers in my system, I looked and the one on the right main wire goes down directly to teh pump motor of the hydraulic system , so its looks like there is loop between two.
Les Korcala
Thanks for some good tips and toughts on solving thsi problem, I will check the wires for correct voltage.
Also will check the loose wires when we retract the slide next time ( trveling today to Medford aera of Oregon ) will start the engine , have my wife press the switch and if the slide motor wont start , I will check one by one every wire and see if perhaps its the case!
As you noticed I hace two controlers in my system, I looked and the one on the right main wire goes down directly to teh pump motor of the hydraulic system , so its looks like there is loop between two.
Les Korcala
Les & Cheryl Korcala
Fulltime on the road hub base in Montana
Newell 2001 2 slide #582
security system 2 Rhodesians Ridgebacks (Basha & M'Kala)
Nissan Exterra 2007
Co-Motion "Robusta" tandem
Trek "madone" road bikes
Trek 5.8 MTb