07-04-2016, 07:38 PM
Thank you. My inside storage with shore power is not available yet so i store it outside for now and shut off both battery banks. The 12v compressor is shot and i ordered a new one that will be here Thusday.
I understand the logic of the air system. What I need to grasp better is why the front slide seal stays inflated with all gauges going to Zero but the bedroom one deflates.
Will have to get creative and get a key for the security system and radiator fill. Push come to shove will get a new switch for the the security system and maybe drill out and replace the fill door lock.
The check valve on the 110v compr is bad as well and got a new one coming . Right now the back pressure is too high and the compressor does not restart unless I remove the air line and reconnect it.....most likely the system leaks backwards through the compressor head as well.
I sent an email to Russ White to get more info on the gen/aquahot exhaust repair since my Y pipe ( right before it goes up the stack) is collapsed. ...that will be fun to cut off and R&R
I understand the logic of the air system. What I need to grasp better is why the front slide seal stays inflated with all gauges going to Zero but the bedroom one deflates.
Will have to get creative and get a key for the security system and radiator fill. Push come to shove will get a new switch for the the security system and maybe drill out and replace the fill door lock.
The check valve on the 110v compr is bad as well and got a new one coming . Right now the back pressure is too high and the compressor does not restart unless I remove the air line and reconnect it.....most likely the system leaks backwards through the compressor head as well.
I sent an email to Russ White to get more info on the gen/aquahot exhaust repair since my Y pipe ( right before it goes up the stack) is collapsed. ...that will be fun to cut off and R&R
MG