02-20-2017, 11:39 AM
The result of the check valve fix was that one of the seals now stays well inflated but the other (Slide 1) deflates overnight. I am thinking that I have a slight leak somewhere in the slide seal.
So....Just to wrap this up.
The seals are fed from the 120V compressor and tank only. The 12V compressor and tank are not associated with the seals.
If you turn off your 120V compressor, you WILL eventually lose pressure in your slide seals.
I am not satisfied with this answer and will continue to search for a viable alternative.
So....Just to wrap this up.
The seals are fed from the 120V compressor and tank only. The 12V compressor and tank are not associated with the seals.
If you turn off your 120V compressor, you WILL eventually lose pressure in your slide seals.
I am not satisfied with this answer and will continue to search for a viable alternative.
Bill Johnson
Birmingham, Alabama