03-23-2017, 04:49 PM
Chester, you might need a tool from HWH to make removal of the valve easier. http://www.hwhcorp.com/ml11428-75.pdf
Before you touch any of the HWH solenoid valves, it is good practice to relieve the pressure on the air seals in case the slideout moves a bit. That way you won't roll the seal, causing much weeping, wailing, and gnashing of teeth.
You use the adjustment nut or T on top of the valve to relieve the pressure before unscrewing the valve from the manifold.
http://www.hwhcorp.com/mi159502.pdf
Before you touch any of the HWH solenoid valves, it is good practice to relieve the pressure on the air seals in case the slideout moves a bit. That way you won't roll the seal, causing much weeping, wailing, and gnashing of teeth.
You use the adjustment nut or T on top of the valve to relieve the pressure before unscrewing the valve from the manifold.
http://www.hwhcorp.com/mi159502.pdf
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)