09-17-2017, 06:33 AM
I recently replaced one of the right front air bags on my classic. Now in travel mode that corner sits a little low, about an inch. I have only been able to come up with 2 possible reasons. 1) Different air pressure side to side that is unrelated to the bag replacement. My air valves do leak and could be causing a pressure difference left to right 2) New air bag does not produce as much height for given pressure. I would check the pressures but currently do not have the fittings to tie in a gauge.
edit.. The front uses one HCV to supply both sides and was also recently replaced
edit.. The front uses one HCV to supply both sides and was also recently replaced
Marcus
Former caretaker of 1983 Newell, Cummins VT903, Allison 654CR