[les korcala]

                    Hello,

I was working on problem with air leak from Air Brake pedal system and ran in to much bigger problem then I was asking for !

We are still stying at RV park for another week or so and hope to fix it.

What I was trying to do as severl mentioned to replace the air hose coming in to the air pedal cyclinder and its union to change to better fitting.
I tried to loose the brass nut by the pedal's brake cylinder & I think its head broke off! scary sound all the air come of the small hole , lots of it , all of it!

if the nut is broken off and its threads are still inside of the cylinder! Looks like big problem ! Iam going to figure out how to remove it?

I wanted to take the hose and the brass union and take to local NAPA and get new better fitting since the old one was leaking lot of air.

As Chester sugested Newell cut the hoses way to short and the hoses are stiff and puts lot of stress at angle and create air leak at the fitting part of it!

Please help if anyone has any tips!

Now looks like I need to replace entire hose section? is any of you knows where the other end of the hose goes? I noticed it swings to the left from the brake pedal, is perhaps somhere near generator area?
I have attched images of the brass nut and fitting parts.

Les