04-03-2018, 05:22 PM
Hello all,
Does anybody have a source for bezels on the square gauges over the driver ? ( Line voltages, amps, DC draw etc)
The gauge itself is held in place by the plastic front black bezel with 2 screws on the sides (inside) hooked in 2 thin metal retainers molded into the plastic of the bezel. When the side retainers break off ( and they do easily after a few years of heat) , the gauge falls inside the cabinet.
I could use 4 bezels......plan B is silicone on the back but I'd rather do it right if I can find the bezels.....
Any ideas ?
Does anybody have a source for bezels on the square gauges over the driver ? ( Line voltages, amps, DC draw etc)
The gauge itself is held in place by the plastic front black bezel with 2 screws on the sides (inside) hooked in 2 thin metal retainers molded into the plastic of the bezel. When the side retainers break off ( and they do easily after a few years of heat) , the gauge falls inside the cabinet.
I could use 4 bezels......plan B is silicone on the back but I'd rather do it right if I can find the bezels.....
Any ideas ?
MG