[HoosierDaddy]

I got the A/C together and functional today! The new motor I installed was the same model that had been used as a replacement  by another Guru a while back. I'm slightly concerned that the new motor is rated at 1/10hp and the original motor was 1/6hp but the good news is that the new motor contains ball bearings instead of bushing bearings as in the original. I am posting a pic of the motor box label and the motor installed in the blower housing. I had to make a few modifications. The motor shaft had to be shortened by about 5/16 inch, the new motor has it's run capacitor mounted to the side of the motor. I remounted it to the outside of the blower housing for more clearance in the air inlet. I eliminated the (brown)wire that connected the original fan motor to the A/C case mounted capacitor. The black and white 115V wires connected as before.
Thanks to Richard for offering the best help he could considering my inability to describe the problem properly or supply accurate facts.....