09-12-2023, 10:31 AM
When I bought the coach, the plumbing bay door had a loose outer skin. With the possibility of this coach going for a full paint job I wanted to tackle this to avoid additional charges from the shop doing the paint work. What I found is Newell used some form of double sided tape that dried up and let go. I bought some urethane two part caulk panel adhesive but wondering if I should just put 3m wide double side tape instead. What do you guys think? I cleaned up both faces of the panels. the 3M red tape that Home Depot sells might be just a hair thicker than what was used but I don't see that making a bid difference. Either way, I do have some wood and clamps to hold the skin onto the base while either method sets.
--Simon
1993 8v92TA #312