[pestes]

When it rains, it pours. Or, when it leaks air ... it blows?

Seems like I have an air issue in the front on top of my leaking solenoid valve in the back. I had convinced myself that the front was dropping as a result of the left rear dropping due to the valve leak back there. But I've now proven that's just not the case.

With no solenoids engaged, the front of the coach stays up. But when I go to travel mode, only the left side drops. The right side stays at a proper travel height.

I propped up the front of the coach and tried poking around with my Whisper, but can't pinpoint anything as it's hard to get very far under the front.

Looking for ideas on what it might be. On front there's only a single HCV, isn't there? So I'm thinking it's not that being that the passenger side stays up.

Also trying to figure out how I can rig the coach to drive it about 5 miles on back roads to a shop in order to be able to get under there.

Being that it only loses air in travel mode - would it be a terrible idea to manually get the height to approximately ride height and then disconnect the travel solenoids? I do not have an override switch on my dash. As soon as I start moving more than a crawl, the HWH automatically goes to travel mode.