You are not logged in or registered. Please login or register to use the full functionality of this board...


sight tube for hydraulic tank in engine compartment
#11

ok, got it drained. btw there is about 4 gallons in that tank.

had to take the top sight glass fitting off and put a tube down it. taking the top of the cap housing didnt work.

the acrylic tubing i got will not work. in taking the old clear tube off it is a dot 1/4" clear air tubing. it is labeled on the side.

of course that seems to be unobtainium.

so back to figuring out what will hold up to atf long term that is 1/4 od tubing.

i am in research overload. any opinions are welcome.

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply


Messages In This Thread

Forum Jump:


Users browsing this thread: