[RSC]

Worked great! Replaced all three without much trouble. The motor comes with a capacitor that you simply mount on the squirrel cage housing.
5/16 shaft, correct length, correct motor diameter.
I did have to hack saw off 2 studs on the motor housing that were in the way of the bracket clamp. Easy.
Word to the wise: make sure you swap the purple/yellow plug in to connect the purple to yellow, and yellow to purple so the motor spins the correct direction, because this motor is reversible!

Hey John, I'm installing the same motors in mine and was wondering how did you wire the new motor? Cause by the looks of it I'm going to have a left over red wire and do I need to mount the green wire from the motor to the squirrel cage housing? thanks in advance......