01-08-2014, 08:12 PM
On gel setting now. That is what Balqon recommended.
Good point! I'll set it for lead acid (only have LA or gel settings) then I can use the ambient temp setting to bring it down a bit if it's too high.
I think part of my problem is the inverter is reading 0.4 volts higher than the Victron monitor and battery.
Good point! I'll set it for lead acid (only have LA or gel settings) then I can use the ambient temp setting to bring it down a bit if it's too high.
I think part of my problem is the inverter is reading 0.4 volts higher than the Victron monitor and battery.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337