[whatsnewell]

Hey Chester.....here you go:

I hooked up #5 - trigger wire (this is where the trigger wire was on the old, not #4 as I showed on the picture) on from the old relay to #87 on the new. I hooked up #1 (ground) from the old to #85 on the new. I hooked up #4 (battery source) on the old to #86 on the new. I hooked up #3 (sends signal to turn signal) on the old to #30 on the new. 87a was not used.

This is an SPST (single pole - single throw) relay with 5 pins labeled 30, 85, 86, 87, 87a.