06-12-2021, 09:38 AM
I know this is an ancient thread, but it seems to be most detailed one about gluing the bay door skins back on. I wanted to see if anyone has any updates or something to add about doing this?
A few months ago I removed skins on two doors, cleaned thoroughly, sanded, and re-attached using the GFlex epoxy mentioned in this post. One of the skins I attached using the epoxy has already come loose. If I made a mistake on attaching it, I don't know what it would have been. So I'm hesitant to use this epoxy again. Has anyone used a product that is still holding tight years later? Any other thoughts?
Regards,
Alan Johnson
A few months ago I removed skins on two doors, cleaned thoroughly, sanded, and re-attached using the GFlex epoxy mentioned in this post. One of the skins I attached using the epoxy has already come loose. If I made a mistake on attaching it, I don't know what it would have been. So I'm hesitant to use this epoxy again. Has anyone used a product that is still holding tight years later? Any other thoughts?
Regards,
Alan Johnson
Alan Johnson
Dallas Tx
Newell #485
1998 2 slides