[Wanderman]

Did a bit of work on the HVAC single 1301 unit and thermostat today using Richard's excellent troubleshooting/testing guide.

After confirming POWER (RED) and GROUND at the t-stat this is what I found:

1. The PSG thermostat is intermittent, the slider switches aren't working well. It could be cleaned, but unknown at this point. I have a new thermostat on the way.

2. Jumping the fan GL to RED I get a click from the AC bay.

3. Jumping the fan GH to RED I get a click from the AC bay.

4. Jumping the compressor/fan Y1 to RED I get Nothing at all.

Tomorrow I will find the access to the AC panel itself and confirm I have 120v power at the box and at the control panel. Who know, maybe there are some wires or plugs disconnected. I know the PO was messing with it.

Hope the control panel is not toasted nor unrepairable. Newell did tell me they have boards available, but....it's Newell so at what cost.. Though the AH DPST 240V/120V Limit thermostat the sold me was the least expensive of anyplace so who knows.

Thanks to Richard for walking me through this.