06-30-2022, 06:07 AM
There can be up to a five minute delay before the Tstat tells the board to activate. The delay is built in to keep you from short cycling the compressor.
If you suspect the Tstat, put it on the bench, feed 12V to it, and measure the outputs of the different functions with the meter. The point is to isolate the Tstat from the board in diagnosing the issue.
If you suspect the Tstat, put it on the bench, feed 12V to it, and measure the outputs of the different functions with the meter. The point is to isolate the Tstat from the board in diagnosing the issue.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home )