You are not logged in or registered. Please login or register to use the full functionality of this board...


Size of shop air compressors
#7

Tom, I have a 40 year old cast iron Sears single stage 240 volt which I have not been able to wear out. It is rated at 150 psi. Most of the newer single stage are rated to 135 psi. I have a couple of those I use for nailers etc. because I can move them around easy. I like my older one in my MH storage area because the newer ones even rated at 135 psi want air my front tires to 130 pounds. My advice is to buy more than you will think you will need. The one Jimmy showed you is a great compressor. You will pay more for a two stage, but you will not run out of air and it max. out at 175 psi. If my Sears ever craters this is what I will buy. My Sears is horizontal also.

NAPA here in town always several compressor setting around in the store. You might check with them and also Grainger.

Chappell and Mary
2004 Foretravel 36 foot
Reply


Messages In This Thread
Size of shop air compressors - by encantotom - 08-13-2014, 12:01 PM
RE: Size of shop air compressors - by Retro - 08-13-2014, 12:12 PM
RE: Size of shop air compressors - by encantotom - 08-13-2014, 12:45 PM
RE: Size of shop air compressors - by Ozarkguy - 08-13-2014, 12:46 PM
RE: Size of shop air compressors - by Retro - 08-13-2014, 12:52 PM
RE: Size of shop air compressors - by encantotom - 08-13-2014, 01:05 PM
RE: Size of shop air compressors - by qcj - 08-13-2014, 01:20 PM
RE: Size of shop air compressors - by Retro - 08-13-2014, 01:24 PM
RE: Size of shop air compressors - by Ozarkguy - 08-13-2014, 01:25 PM
RE: Size of shop air compressors - by Trainer - 08-13-2014, 01:39 PM
RE: Size of shop air compressors - by Ozarkguy - 08-13-2014, 01:53 PM
RE: Size of shop air compressors - by Trainer - 08-13-2014, 02:17 PM
RE: Size of shop air compressors - by encantotom - 08-13-2014, 04:11 PM
RE: Size of shop air compressors - by Chester Stone - 08-13-2014, 05:30 PM
RE: Size of shop air compressors - by encantotom - 08-13-2014, 06:05 PM
RE: Size of shop air compressors - by arcticdude - 08-13-2014, 06:59 PM
RE: Size of shop air compressors - by Ozarkguy - 08-14-2014, 06:06 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)