[Flick]

Well Jimmy you were right. The Dremel Multimax is my new best friend. I cut out a section of the floor board that goes under the wall into the bathroom and under the sink vanity. As you can see from these photos I ended up taking out the vanity to see how far the bad wood went. It appears to me the leak that rotted the wood must have has something to do with the sink area because of the way it is directly below the pipes. Also most of the screws in the bottom of the cabinet I had to cut out because they were so rusted. Also check the pic before I pulled the vanity out. You can see the bottom of it is all black like the rotten wood of the floor. Although we only used the RV a couple of times we never noticed a leak. It was so dry that I wonder if someone fixed the leak some time ago but never addressed the floor.

Well I can't seem to load multiple photos from my phone because they must all have the same name and the website will only allow me to load the image name once. So the only pic I will post for now is looking into the bathroom where I have removed the vanity. If you look to the right outside you can see the edge of the appx 2'x2' section I took out of the floor. I will need to remove a good chunk of the floor under vanity and replace it as well. Any tips you have would be welcome. Never intended to have to remove this much stuff. I am tired of destructing and want to put things back together and get on with the flooring.