You are not logged in or registered. Please login or register to use the full functionality of this board...


Air brakes for towed vehicle
#1

I bought an M&G air brake system for the towed vehicle. Have not received it yet, but does anyone know where to tap into the coaches air brake system, what fittings I need, and where the best place to mount the air valve on the back of the coach? I have a 1996 45'. Thanks for any help. Idea

John, Sheri & Lily Kai Curwick
1996 Newell #406, 2015 Jeep Rubicon Hard Rock, FJ Cruiser, Harley Fatboy. 35 CABO Express Tongue
Reply
#2

steve bare and i did mine. but it was a couple of years ago. if i recall, i called m&g and they told us where to hook it in. it was just a T fitting i believe.

the hardest thing was taking the wheel off to make it easier to get at.

steve, i fixed that....i bought a 1" air impact gun.....ha

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#3

The "T" in the first photo is 3/8 NPT.  It is threaded directly into the right tag brake chamber.  Then the original brake line is threaded into the other end.  Then a 3/8" to 1/4" air line fitting is threaded into the third outlet.

You can mount it any where that it will be convenient for you to hook up.  Second photo shows where mine is on the lower right.  Hard to see air line, but it is just to the left of the electrical connector just above the trailer hitch.

Tom,
Don't forget the torque wrench. Have to torque them to 450 ft lbs.


Attached Files Thumbnail(s)
       

Steve Bare
1999 Newell 2 slide #531
Reply
#4

I tapped mine into one of the tag air bake lines. You will love the system.

Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home Cool )
Reply
#5

(04-17-2015, 10:40 AM)rheavn Wrote:  The "T" in the first photo is 3/8 NPT.  It is threaded directly into the right tag brake chamber.  Then the original brake line is threaded into the other end.  Then a 3/8" to 1/4" air line fitting is threaded into the third outlet.

You can mount it any where that it will be convenient for you to hook up.  Second photo shows where mine is on the lower right.  Hard to see air line, but it is just to the left of the electrical connector just above the trailer hitch.

Tom,
Don't forget the torque wrench.  Have to torque them to 450 ft lbs.

The brass fitting looks like an elbow fitting? Forgive my thickness, but it's still not clear what exactly to do. I thought I could just "T" off a brake line, but I'm certainly not sure.
You are right, in the second pic, I can not tell where the fitting is.

John, Sheri & Lily Kai Curwick
1996 Newell #406, 2015 Jeep Rubicon Hard Rock, FJ Cruiser, Harley Fatboy. 35 CABO Express Tongue
Reply
#6

steve, that is next

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply
#7

sorry about a slight misspeak.  There is a 90 brass elbow that is connected directly into the brake chamber--that was originally where the brake line connected.  The brake line was removed from that fitting and the "T" installed.

In the second picture look just above the receiver on the right side of the trailer hitch.  You'll see a baby blue line going to a chrome connector--That is the electrical cord.  Just to the left of that you will see a black boot connected to a black 1/4" air line and some baby blue line protector--that is the air line.  It doesn't matter where you mount the air line.  Just make sure you have unobstructed access to it once the engine cover is closed.

I added three close ups.

Remember you are messing with your air brakes.  If unsure have a qualified mechanic do it for you!


Attached Files Thumbnail(s)
           

Steve Bare
1999 Newell 2 slide #531
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)